Obsnap Instruments Sdn Bhd
29A, Jalan SS 15/4C, 47500 Subang Jaya, Selangor, Malaysia.
Hanatek - Carton Crease Proofer (CCP)
| Previous | 29 / 36 | Next |
The instrument can assist in checking ink and coating flexibility. The CCP comes complete with commercially produced rules and dies which are identical to those used on a full sized cut and crease machine.
Carton Crease Proofer Features:
Optimise Crease Settings
The Hanatek CCP allows the user to produce production quality crease samples without committing valuable machine time.
The Carton Crease Proofer comes complete with commercially produced rules and dies which are identical to those used on a full sized cut and crease machine.
These can be used to identify a crease with the optimum mechanical properties and cosmetic appearance.
Control Substrate Quality
Important substrate properties can be easily compared before printing and converting.
- Check for coating cracking
- Produce production quality creases and predict carton run-ability using a Hanatek crease and board stiffness tester
Determine Ink and Coating flexibility
The CCP is used in the in laboratory to develop flexible coatings that resist cracking on commercial cartons.
Testing Samples
Samples prepared using the Hanatek Crease Proofer can be tested using the Hanatek Carton Force Analyser variable sample size instrument. Board stiffness and crease recover can be tested.
- Suitable for any substrate 300-1000μm
Standard creasing rules
- 3 PT: 13 x Channels, 1.35 - 2.35mm in 0.1mm increments
- 2 PT: 13 x Channels. 1.00 - 2.20mm in 0.1mm increments
Optional crease rules
- 1.5 PT and 4 PT
- Selectable by user
Size
- (H) 350 x (W) 390 x (D) 200mm
Weight
- 25kg
