Obsnap Instruments Sdn Bhd
29A, Jalan SS 15/4C, 47500 Subang Jaya, Selangor, Malaysia.
Hanatek - Precision Thickness Gauge (FT3)
| Previous | 23 / 36 | Next |
Operated via an intuitive touch screen interface the instrument will allow the user to define batch size, dwell time & measuring speed.
Full test statistics can be easily viewed or printed to label for easy documentation control.
Contact pressure and contact area are factory set options dependent on the testing standard used
Precision Thickness Gauge Features
Test Parameters
Physical test parameters can be factory configured according to International Standards or customer requirements. Measurement speed and dwell time are controlled by user defined parameters.
- Momentum and profile of measurement head
- Measurement pressure
- Measurement dwell time
Instrument
The instrument is linearised throughout its measurement range using a multi point calibration.
Flatness of measurement head/anvil <0.1µm Typical parallelism <1µm
- Accuracy, Linearity, Calibration
- Flatness/Parallelism of Measurement Area
Operator
The Hanatek instrument provides full statistical analysis of data. The optional printer allows a time/date stamped results label to be attached to job sheet or retained samples
User defined routines or the optional footswitch mean hands free operation for easy sample manipulation
- Incorrect recording and analysis of results
- Sample handling and measurement technique
Temperature
Temperature stability circuitry ensures the instrument electronics reach optimum conditions before testing.
Plastic Film
BS 2782-6
Methods of testing plastics. Dimensional properties. Determination of thickness by mechanical scanning of flexible sheet
DIN 53370
Testing of plastics films - Determination of the thickness by mechanical scanning
ISO 4593:1993 Part A OR B
Standard Guide for determination of Thickness of Plastic Film Test Specimens
Paper & Board
ISO 534 : 2005
Paper and board. Determination of thickness, density and specific volume
DIN 53105
BS EN 20534
Method for determination of thickness and apparent bulk density or apparent sheet density of paper and board
TAPPI T 411
Thickness of Paper and Paperboard (Soft Platen Method), Test Method T 551 om-06
SCAN P7/P31
FEFCO No 3
ISO 3034
Corrugated fibreboard. Determination of the thickness of corrugated fibreboard
Self Adhesive Tape
DIN EN 1942
Self adhesive tapes - Measurement of Thickness
Tissue
BS EN 12625-3
Tissue paper and tissue products. Determination of thickness, bulking thickness and apparent bulk density
SCAN P47
BS 7387
Method for determination of the bulking thickness, apparent bulk density, compressibility and compressibility index of soft creped tissue paper
Textile
ISO 5084
Determination of thickness of textiles and textile products
ASTM D1777
Part 1, 3, 4 OR 5
Standard Test Method For Thickness of Textile Materials
ISO 2589
Leather - Physical and mechanical tests - Determination of thickness
Gaskets
ASTM F36-99
Standard Test Method for Compressibility and Recovery of Gasket Materials
Floor Coverings
EN428
Resilient floor coverings - Determination of overall thickness
Flexible Packaging
ASTMF2251
Standard Test Method for Thickness Measurement of Flexible Packaging Material
Features
- 0.1 µm
Repeatability
- Better than 0.4 µm*
Reproducibility
- Better than 0.8 µm*
Measurement Range
- 0-4000† µm
- †0 – 19000 µm extended range instrument also available
Weight
- 10kg (max)
- (h) 285 x (w) 302 x (l) 285 mm
Output
- RS232
Power
- 110/220V 50/60 Hz
Accessories
- All Hanatek FT3 gauges are supplied with a UKAS traceable calibration certificate and traceable 2000 µm and 500 µm checking gauges
Options
- Results printer, footswitch, additional weights
*Dependant on operating conditions and instrument configuration
