Obsnap Instruments Sdn Bhd
29A, Jalan SS 15/4C, 47500 Subang Jaya, Selangor, Malaysia.
+603-5621 5786
+603-5621 5829
+60122185651 (Enquiry)
+60162233687 (Vacancy)
Mahr Metrology - GMX 600
| Previous | 3 / 3 | Next |
The successful combination of diameter, gear and form measurement in one clamping saves additional investment, maintenance costs and time.
Full functionality as a Cylinder coordinate measuring machine and form tester up to an outer diameter of 600 mm.
The MarGear GMX 600 W, as a complete solution, can also be used for measuring hydraulic parts, crankshafts, camshafts and pistons.
Full functionality as a Cylinder coordinate measuring machine and form tester up to an outer diameter of 600 mm.
The MarGear GMX 600 W, as a complete solution, can also be used for measuring hydraulic parts, crankshafts, camshafts and pistons.
Combining gear measuring tasks with various diameter, form & position features has never been easier. Thanks to high precision scales and smooth drive units even contour measurements and waviness analysis are possible.
With over 6000 units sold, the MarWin environment is a clear and simple way of creating complete programs in Teach In mode.
This improves programming efficiency and reduces the possibility of incorrect use.
Proven GMX realtime machine error correction is also used for positioning movements with the new MarEcon control unit, guaranteeing maximum speed and precision throughout the entire measuring and movement sequence.
The high-precision 3D scanning sensor combined with fully automated swivelling unit leads to highest flexibility even regarding future measuring tasks.
The use of standardized interfaces leads to universal communication in terms of Industry 4.0. The following interfaces are available:
Technical Data
With over 6000 units sold, the MarWin environment is a clear and simple way of creating complete programs in Teach In mode.
This improves programming efficiency and reduces the possibility of incorrect use.
Proven GMX realtime machine error correction is also used for positioning movements with the new MarEcon control unit, guaranteeing maximum speed and precision throughout the entire measuring and movement sequence.
The high-precision 3D scanning sensor combined with fully automated swivelling unit leads to highest flexibility even regarding future measuring tasks.
The use of standardized interfaces leads to universal communication in terms of Industry 4.0. The following interfaces are available:
- GDE interface for inner and outer gears
- Data export to QS-STAT
- ASCII
Technical Data
|
Max. workpiece weight [kg]
|
300 (on fixed base plate) 100 (on centering and tilting table)
|
|---|---|
|
Mass [kg]
|
2250
|
|
Accuracy
|
Accuracy class I for gear measurement according to VDI/VDE 2612/2613 Group 1 at 20°C ±2°C
|
|
Axial runout deviation (µm+µm/mm measuring radius)
|
0.07 µm + 0.0008 µm/mm
|
|
Footer text
|
*max. diameter of spur gears
|
|
Radial runout deviation (µm in table height)
|
≤ 0.1 µm
|
|
Measuring path Z (mm)
|
700
|
|
Measuring path Y (mm)
|
600
|
|
Diameter max.* [mm]
|
600
|
|
Distance between peaks [mm]
|
1000
|
|
Measuring path X (mm)
|
300
|
