Obsnap Instruments Sdn Bhd
29A, Jalan SS 15/4C, 47500 Subang Jaya, Selangor, Malaysia.
+603-5621 5786
+603-5621 5829
+60122185651 (Enquiry)
+60162233687 (Vacancy)
TQC sheen - Baker Film Applicators
| Previous | 4 / 22 | Next |
Cylindrical film applicator with 4 application sides for applicating paint-films of 4 different pre-defined thicknesses. The Baker applicator’s are available in film width 60 mm and 80 mm and are suitable for applying a host of different products onto flat and relatively solid substrates. Since it’s made out of high-grade stainless steel, the Baker Film Applicator will not be affected by acid or base elements.
Specifications:
*Through hardening versus Case-hardening or surface hardening. Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.
ORDERING INFORMATION
Art. No. VF2145
TQC Baker applicator 60mm, 15/30/60/90µm
Art. No. VF2146
TQC Baker applicator 60mm, 30/60/90/120µm
Art. No. VF2147
TQC Baker applicator 60mm, 50/100/150/200µm
Art. No. VF1500
TQC Baker film applicator 80mm, 15/30/60/90µm
Art. No. VF1501
TQC Baker film applicator 80mm, 30/60/90/120µm
Art. No. VF1502
TQC Baker film applicator 80mm, 50/100/150/200µm
Art. No. VF1510
TQC Baker film applicator width 60mm, 4 gaps as desired
Max. gap size 3000µm
Art. No. VF1515
TQC Baker film applicator width 80mm, 4 gaps as desired
Max. gap size: 3000µm
Art. No. VF1560
TQC Baker film applicator width 80mm, 2x90µm / 2x150µm
(special diameter: 18mm instead of 27mm)
Art. No. VF1520
TQC Baker film applicator width 100mm, 4 gaps as desired
Art. No. VF1521
TQC Baker film applicator width 100mm, gaps 15/30/60/90µm
Art. No. VF1522
TQC Baker film applicator width 100mm, gaps 30/60/90120µm
Art. No. VF1523
TQC Baker film applicator width 100mm, gaps 50/100/150/200µm
Art. No. VF1525
TQC Baker film applicator width 150mm, 4 gaps as desired
Max. gap size: 3000µm
Art. No. VF1526
TQC Baker film applicator width 150mm, gaps 15/30/60/90µm
Art. No. VF1527
TQC Baker film applicator width 150mm, gaps 30/60/90120µm
Art. No. VF1528
TQC Baker film applicator width 150mm, gaps 50/100/150/200µm
Specifications:
| Material | DAIDO 440C medical grade Martensitic stainless tool steel. Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*) & tempered |
| Surface treatment | Polished |
| Overall accuracy | + 2 μm |
| Accuracy | Better than 3 micron |
| Outer dimensions | 100 * 22 * 22mm / 120 * 22 * 22 mm |
*Through hardening versus Case-hardening or surface hardening. Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.
ORDERING INFORMATION
Art. No. VF2145
TQC Baker applicator 60mm, 15/30/60/90µm
Art. No. VF2146
TQC Baker applicator 60mm, 30/60/90/120µm
Art. No. VF2147
TQC Baker applicator 60mm, 50/100/150/200µm
Art. No. VF1500
TQC Baker film applicator 80mm, 15/30/60/90µm
Art. No. VF1501
TQC Baker film applicator 80mm, 30/60/90/120µm
Art. No. VF1502
TQC Baker film applicator 80mm, 50/100/150/200µm
Art. No. VF1510
TQC Baker film applicator width 60mm, 4 gaps as desired
Max. gap size 3000µm
Art. No. VF1515
TQC Baker film applicator width 80mm, 4 gaps as desired
Max. gap size: 3000µm
Art. No. VF1560
TQC Baker film applicator width 80mm, 2x90µm / 2x150µm
(special diameter: 18mm instead of 27mm)
Art. No. VF1520
TQC Baker film applicator width 100mm, 4 gaps as desired
Art. No. VF1521
TQC Baker film applicator width 100mm, gaps 15/30/60/90µm
Art. No. VF1522
TQC Baker film applicator width 100mm, gaps 30/60/90120µm
Art. No. VF1523
TQC Baker film applicator width 100mm, gaps 50/100/150/200µm
Art. No. VF1525
TQC Baker film applicator width 150mm, 4 gaps as desired
Max. gap size: 3000µm
Art. No. VF1526
TQC Baker film applicator width 150mm, gaps 15/30/60/90µm
Art. No. VF1527
TQC Baker film applicator width 150mm, gaps 30/60/90120µm
Art. No. VF1528
TQC Baker film applicator width 150mm, gaps 50/100/150/200µm
