Obsnap Instruments Sdn Bhd
29A, Jalan SS 15/4C, 47500 Subang Jaya, Selangor, Malaysia.
+603-5621 5786
+603-5621 5829
+60122185651 (Enquiry)
+60162233687 (Vacancy)
Fungilab - Viscometer - Hoppler Viscometer
| Previous | 3 / 22 | Next |
Viscoball
The Viscoball measures accurately the viscosity of transparent Newtonian liquids and gases (with a special glass ball).
Features
New
Changeable angle
Fixed angle
Complies with
DIN 53015 / ISO 12058
Kit of 6 balls
Wide viscosity range covered
Simple thermostatic
Measuring with easy conection to our thermovisc series
Viscosity readings
Dinamic (cP or mPa·s)
Kinematic (cSt)
Reproducibility: 0.5%
Comparability: 1%
Viscosity range
0.5 - 10^5 mPa·s (cP)
0.5 - 105 mPa·s (cP)
- High accuracy through improved visibility of falling ball.
- Minimized test time due to accurate return run of the ball.
- Reduced cost of ownership through increased life time of falling tube.
- Extended re-calibration periods through improved bearing support.
The VISCO BALL viscometer is mainly used for low viscosity substances such as used in:
Measuring principle
The rolling and sliding movements of a ball through the sample liquid are timed in an inclined cylindrical measuring tube. The sample viscosity is correlated to the time a ball requires to traverse a definite distance. By turning the measuring tube upside down again the return of the ball may also be used for an additional measurement applying the return cons- tant. The test results are given as dynamic viscosity in the internationally standardized, absolute units of mPa·s.
Materials
Balls 1,2 and G, Borosilicate glass
Balls 3 and 4, Nickel iron alloy
Balls 5 and 6, stainless steel
The instrument is supplied with 6 balls, control thermometer (-1 to +26ºC) cleaning tools, calibration sheet and instruction manual.
On request:
Glass thermometer for different temperature ranges
V91002 Glass thermometer +24 to +51 ºC, div. 0.1 ºC
V91003 Glass thermometer +49 to +76 ºC, div. 0.1 ºC
V91004 Glass thermometer +74 to +101 ºC, div. 0.1 ºC
V91005 Glass thermometer +99 to +126 ºC, div. 0.1 ºC
V91107 Ball G for gas measurements
Standard oils of differents viscosities are avaible for calibration.
Complies with DIN 53015 / ISO 12058
Standard Delivery
The Viscoball measures accurately the viscosity of transparent Newtonian liquids and gases (with a special glass ball).
Features
New
Changeable angle
Fixed angle
Complies with
DIN 53015 / ISO 12058
Kit of 6 balls
Wide viscosity range covered
Simple thermostatic
Measuring with easy conection to our thermovisc series
Viscosity readings
Dinamic (cP or mPa·s)
Kinematic (cSt)
Reproducibility: 0.5%
Comparability: 1%
Viscosity range
0.5 - 10^5 mPa·s (cP)
0.5 - 105 mPa·s (cP)
- High accuracy through improved visibility of falling ball.
- Minimized test time due to accurate return run of the ball.
- Reduced cost of ownership through increased life time of falling tube.
- Extended re-calibration periods through improved bearing support.
The VISCO BALL viscometer is mainly used for low viscosity substances such as used in:
- Mineral oil industry (oils, liquid hydrocarbons).
- Food industry (sugar solution, honey, beer, milk, gelatine, fruit juice).
- Chemical industry (polymer solutions, solvents, resin solutions, latex dispersions, adhesive solutions).
- Cosmetic/Pharmaceutical industry (raw materials, glycerine, emulsions, suspensions, solutions, extracts).
- Petroleum industry (light crude, machine oil, crude petroleum).
- Fuels (petrol, diesel oil, paraffin).
- Paper industry (emulsions, pigment dispersion, paper additives).
- Paints and varnishes (printing inks, varnishes, water lacquers, inks).
- Detergents (liquid washing agents, washing-up liquids, tenside solu- tions).
| FEATURES | |
|---|---|
| Fixed angle | Complies with DIN 53015 / ISO 12058 |
| Kit of 6 balls | Wide viscosity range covered |
| Simple thermostatic | Measuring with easy conection to our thermovisc series |
| VISCOSITY READING | |
|---|---|
| Dynamic viscosity | cP or mPa·s |
| Kinematic viscosity | cSt |
| TECHNICAL SPECIFICATIONS | |
|---|---|
| Viscosity range | 0.5 - 105 mPas·s (cP) |
| Temperature range | -20ºC up to +120ºC |
| Reproducibility | Better than 0.5% |
| Comparability | Better than 1% |
The rolling and sliding movements of a ball through the sample liquid are timed in an inclined cylindrical measuring tube. The sample viscosity is correlated to the time a ball requires to traverse a definite distance. By turning the measuring tube upside down again the return of the ball may also be used for an additional measurement applying the return cons- tant. The test results are given as dynamic viscosity in the internationally standardized, absolute units of mPa·s.
Materials
Balls 1,2 and G, Borosilicate glass
Balls 3 and 4, Nickel iron alloy
Balls 5 and 6, stainless steel
The instrument is supplied with 6 balls, control thermometer (-1 to +26ºC) cleaning tools, calibration sheet and instruction manual.
On request:
Glass thermometer for different temperature ranges
V91002 Glass thermometer +24 to +51 ºC, div. 0.1 ºC
V91003 Glass thermometer +49 to +76 ºC, div. 0.1 ºC
V91004 Glass thermometer +74 to +101 ºC, div. 0.1 ºC
V91005 Glass thermometer +99 to +126 ºC, div. 0.1 ºC
V91107 Ball G for gas measurements
Standard oils of differents viscosities are avaible for calibration.
Complies with DIN 53015 / ISO 12058
| Ball | no Viscosity range (mPa·s) |
|---|---|
| 1 | 0.6 to 10 |
| 2 | 7 to 130 |
| 3 | 30 to 700 |
| 4 | 200 to 4,800 |
| 5 | 1,500 to 45,000 |
| 6 | > 7,500 |
Standard Delivery
- Set of 6 balls
- Control thermometer ( -1°C a 26°C )
- Cleaning tools
- Calibration sheet
- Pincers to grab up the balls after the set is used
- User manual
